 |
|
 |  |  |
|
|
|
|
| | |
|
|
| Submersible
Pumps - CAL PUMP CPS Torpedo Pumps
1,500 to 10,000 GPH |
|
|
|
|
CAL PUMP
Torpedo T1500
|
Torpedo Pumps are the first pumps of their kind engineered to be powerful, high-flow/low profile pumps that are lightweight and water-cooled. Their unique flow-through water jacketing uses no oil and allows these pumps to be used in or out of water. Their durable, non-corrosive construction, their ease of installation and use, and their versatility make them the pump of choice for many high-flow applications. These pumps operate in fresh or salt water environments. Perfect for ponds and water gardens, waterfalls and water displays, large irrigation systems, cooling and air conditioning systems, and high-volume re-circulation systems.
Continuous operation of these pumps in a pond or waterfall requires that the pump be sized for each specific installation. Pumps last longer and use less electricity when operated in the mid-range of their performance curve (see charts below). To calculate this, measure the height in feet from the surface of the pond water to the point where the water returns to the pond (perhaps a waterfall spillway). Add one (1) foot for every 90 degree elbow through which the water passes from the pump to the point of return. Add one (1) foot for every ten (10) foot length of tubing. This will provide the total height that the pump must move the water. Locate that height in feet on the vertical axis of the charts below and read to he right until you intersect the dotted red line. It is best to operate the pump in the head height shown by the green area. If the lines intersect too far to the left of the graph you must choose a larger pump. If they intersect too far to he right you may either choose a smaller pump or install a ball valve at the discharge of the pump. By slightly closing the ball valve, never more than one third, you will create additional back-pressure on the pump that will allow it to operate correctly in the mid-range of its performance curve. Proper sizing of the pump to your specific installation will ensure optimal performance and maximum pump life.
|
| Product Specifications |
|
|
|
|
|
||
| Part Number | T1500 | T4000 | T7500 | T10000 | |
| Submersible | yes | yes | yes | yes | |
| Max. GPH | 1,518 (@ 280 W) | 4,200 (@ 520 W) | 8,200 (@ 1,020 W) | 9,900 (@ 1,600 W) | |
| Flow Adjustment | no | no | no | no | |
| Max Lift | 28 ft. | 28 ft. | 40.6 ft. | 46 ft. | |
| Power Consumption
(max. is measured at start-up) |
121 W min.
280 W max. |
290 W min.
520 W max. |
395 W min.
1,020 W max. |
575 W min.
1,600 W max. |
|
| Amps
(max. is measured at start-up) |
1.1 A min.
2.5 A max. |
2.6 A min.
4.5 A max. |
3.7 A min.
8.7 A max. |
4.8 A min.
13.6 A max. |
|
| Cord Length | 20 ft. | 20 ft. | 40 ft. | 40 ft. | |
| Discharge Size | 1" male threaded | 1-1/2" male threaded | 3" male threaded | 3" male threaded | |
| Intake Size | 1" male threaded | 1-1/2" male threaded | 3" male threaded | 3" male threaded | |
| GPH @ 1 ft. | 1,488 (@ 277 W) | 4,116 (@ 518 W) | 8,050 (@ 1,020 W) | 9,720 | |
| GPH @ 5 ft. | 1,368 (@ 269 W) | 3,672 (@ 516 W) | 7,500 | 9,120 (@ 1,545 W) | |
| GPH @ 10 ft. | 1,212 (@ 249 W) | 3,110 (@ 510 W) | 6,720 | 8,400 (@ 1,520 W) | |
| GPH @ 20 ft. | 798 (@ 210 W) | 1,830 (@ 435 W) | 5,000 | 6,650 (@ 1,450 W) | |
| GPH @ 25 ft. | 480 (@ 172 W) | 960 (@ 371 W) | 4,000 | 5,740 | |
| GPH @ 30 ft. | 3,000 | 4,660 (@ 1,240 W) | |||
| GPH @ 35 ft. | 1,650 | 3,500 | |||
| GPH @ 40 ft. | 200 | 2,100 (@ 855 W) | |||
| GPH @ 45 ft. | 300 (@ 560 W) | ||||
| Recommended Tubing Diameter | 1-1/2" * | 2" ** | 3" *** | 4" or 2 x 3" **** | |
| Dimensions
(L x W x H) |
10-1/2" x 5-1/4" x 6" | 13-3/8" x 6-3/4" x 6" | 15-1/2" x 7-3/4" x 6-3/4" | 15-1/2" x 7-3/4" x 6-3/4" | |
| Voltage | 120 V, 60 Hz. | 120 V, 60 Hz. | 120 V, 60 Hz. | 120 V, 60 Hz. | |
|
* T1500: 1" male threaded discharge. A hose adapter and female pipe coupling are required to attach 1" tubing. If volume is important as opposed to high head, we suggest to use 1-1/2" kink-free tubing instead. Threaded adapters are required to attach 1-1/2" tubing to the pump discharge. Please ask us.
** T4000: 1-1/2" male threaded discharge. A hose adapter and female pipe coupling are required to attach 1-1/2" tubing. If volume is important as opposed to high head, we suggest to use 2" high-pressure PVC S-40 tubing instead. Threaded and PVC S-40 adapters are required to attach 2" tubing to the pump discharge. Please ask us.
*** T7500: 3" male threaded discharge. We suggest to use 3" high-pressure PVC S-40 tubing. Threaded and PVC S-40 adapters are required to attach 3" tubing. Please ask us.
**** T10000:
3" male threaded discharge. We suggest to use
high-pressure
PVC S-40 tubing. Threaded and PVC S-40 adapters are required to attach
either one 4" tubing line or two 3" tubing lines. Please
ask
us.
| Accessory Products |
| PART # | DESCRIPTION | PRICE |
TF10
 |
Tube Filter
fits T1500 & T4000 1" and 1-1/2" FPT connection, measures 12" L x 2" dia. |
please inquire |
PL0150
 |
Basket
Filter
fits T4000 1-1/2" FPT connection, measures 3-1/2" L x 3" dia. |
please inquire |
PL0300
 |
Basket
Filter
fits T7500 & T10000 3" FPT connection, measures 5" L x 7" dia. |
please inquire |
BS112
 |
Priming
Pot / Basket Strainer
for out-of-pond installation only with clear easy-lock lid 1.5" MPT x 1.5" union flange outlet installs at pump intake |
please inquire |
| BS200
|
Priming
Pot / Basket Strainer
for out-of-pond installation only with clear easy-lock lid 2" MPT x 2" union flange outlet installs at pump intake |
please inquire |
| Customer Feedback |
September 01, 2006
Excellent.
Great price, service, quality.
On time, as ordered, no surprises.
Thanks.
Would not hesitate to recommend
your company.
Peter, Pickering, ON
June 05, 2003
Very satisfied.
Pump I purchased performs well in a fountain spray... many thanks
to all!
Tom, Kenora,
ON
Why buy from us ? Best service and warranty support in Canada. Ask our customers. Largest product selection in Canada. We sell all the major brands. Fast shipping from 16 Canadian distribution centres. All warranties handled in-house. In business since 1986. Selling online since 1997. Friendly and knowledgeable staff. Thousands of happy customers from coast to coast. No Provincial Sales Tax on orders from outside of BC.
|
|
|
|
|
|
|
|
 |
|
All prices
and specifications are subject to change without prior notice. The information
shown on this website is deemed reliable but not guaranteed. Please verify
if important.
Contents (C)
Copyright 1997-2008 Gulf Coast Consultants Inc. dba
Discount Pumps & Liners/PondsOnlineCanada.com.
All rights
reserved. No parts of this site may be duplicated in whole or in part without
express written permission.
.
